[HEADER]
VERSION=1
POWER_CURVE=power.lut			; power curve file
COAST_CURVE=FROM_COAST_REF 		; coast curve. can define 3 different options (coast reference, coast values for mathematical curve, coast curve file)

[ENGINE_DATA]
ALTITUDE_SENSITIVITY=0.1			; sensitivity to altitude
INERTIA=0.09					; engine inertia
LIMITER=9000					; engine rev limiter. 0 no limiter
LIMITER_HZ=30					; Frequency of engine limiter
MINIMUM=2000					; Idle rpm

[COAST_REF]
RPM=8000						; rev number reference
TORQUE=100						; engine braking torque value in Nm at rev number reference
NON_LINEARITY=0					; coast engine brake from ZERO to TORQUE value at rpm with linear (0) to fully exponential (1)

[COAST_DATA]					; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data
COAST0=0						; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data
COAST1=0						; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data
COAST=0.0000015						; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data

[COAST_CURVE]						; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data
FILENAME=coast.lut						; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data

[DAMAGE]
RPM_THRESHOLD=9200			; RPM at which the engine starts to take damage
RPM_DAMAGE_K=1