[HEADER]
VERSION=3

[TRACTION]
TYPE=RWD 

[GEARS]
COUNT=6				; forward gears number
GEAR_R=-3.818			; rear gear ratio
; forward gears ratios. must be equal to number of gears defined on count
GEAR_1=2.5000	
GEAR_2=2.0000		
GEAR_3=1.5217	
GEAR_4=1.2000		
GEAR_5=1.0312
GEAR_6=0.8857

FINAL=3.7500

[DIFFERENTIAL]
POWER=0.30					; differential lock under power. 1.0=100% lock - 0 0% lock
COAST=0.30					; differential lock under coasting. 1.0=100% lock 0=0% lock
PRELOAD=98					; preload torque setting

[GEARBOX]
CHANGE_UP_TIME=100					; change up time in milliseconds
CHANGE_DN_TIME=150					; change down time in milliseconds
AUTO_CUTOFF_TIME=130				; Auto cutoff time for upshifts in milliseconds, 0 to disable
SUPPORTS_SHIFTER=0					; 1=Car supports shifter, 0=car supports only paddles
VALID_SHIFT_RPM_WINDOW=800			;range window additional to the precise rev matching rpm that permits gear engage.
CONTROLS_WINDOW_GAIN=0.4			;multiplayer for gas,brake,clutch pedals that permits gear engage on different rev matching rpm. the lower the more difficult.
INERTIA=0.018						; gearbox inertia. default values to 0.02 if not set

[CLUTCH]
MAX_TORQUE=1100

[AUTOCLUTCH]
UPSHIFT_PROFILE=NONE				; Name of the autoclutch profile for upshifts. NONE to disable autoclutch on shift up
DOWNSHIFT_PROFILE=DOWNSHIFT_PROFILE	; Same as above for downshifts
USE_ON_CHANGES=1					; Use the autoclutch on gear shifts even when autoclutch is set to off. Needed for cars with semiautomatic gearboxes. values 1,0
MIN_RPM=2300						; Minimum rpm for autoclutch engadgement
MAX_RPM=3200						; Maximum rpm for autoclutch engadgement

[UPSHIFT_PROFILE]
POINT_0=20				; Time to reach fully depress clutch
POINT_1=110				; Time to start releasing clutch
POINT_2=120				; Time to reach fully released clutch

[DOWNSHIFT_PROFILE]
POINT_0=10				; Time to reach fully depress clutch
POINT_1=160				; Time to start releasing clutch
POINT_2=200				; Time to reach fully released clutch

[AUTOBLIP]
ELECTRONIC=1			; If =1 then it is a feature of the car and cannot be disabled
POINT_0=10				; Time to reach full level
POINT_1=100				; Time to start releasing gas
POINT_2=150				; Time to reach 0 gas
LEVEL=0.6				; Gas level to be reached

[AUTO_SHIFTER]
UP=6950
DOWN=3800
SLIP_THRESHOLD=0.95
GAS_CUTOFF_TIME=0.190


[DOWNSHIFT_PROTECTION]
ACTIVE=0
DEBUG=0				; adds a line in the log for every missed downshift
OVERREV=200			; How many RPM over the limiter the car is allowed to go
LOCK_N=0